Asus CUA - Manual (Page 20)

20 ASUS CUA User’s Manual
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
3) USB Device Wake Up (USBPWR)
This allows you to disable or enable the USB device wake up function. Set this
jumper to +5VSB if you wish to use your USB devices to wake up your computer.
This feature requires an ATX power supply that can supply at least 2A on the +5VSB
lead. The default is set to +5V because not all computers have the appropriate ATX
power supply. Your computer will not power ON if you set this to +5VSB and do not
have the appropriate ATX power supply. NOTE: This jumper must be set in con-
junction with Wake On USB for STR State in Power Up Control (BIOS).
NOTES
1. For suspend to RAM function, these jumpers must be set to Enable.
2. The total current consumed must NOT exceed the power supply capability
(+5VSB) whether under normal working conditions or in the sleep mode.
Setting USBPWR
+5VSB [1-2] (default)
+5V [2-3]
CUA USB Power Source
USBPWR
CUA ®
+5VSB
(Default)
1
2
+5V
2
3