Asus Rampage III Black Edition - Manual (Page 117)

ROG RAMPAGE III BLACK EDITION 3-21
�.4.� AHCI Configuration
This menu is the section for AHCI configuration. It appears only when you set the
item Configure SATA as from the sub-menu of SATA Configuration to [AHCI].
SATA Port1 [Auto]
Allows you to select the type of device connected to the system.
Configuration options: [Auto] [Not Installed]
SMART Monitoring [Enabled]
Allows you to set the Self-Monitoring, Analysis and Reporting Technology.
Configration options: [Disabled] [Enabled]
v02.61 (C)Copyright 1985-2011, American Megatrends, Inc.
RAMPAGE III BLACK EDITION BIOS Setup Version 0224
Main
Some SATA CD/DVD in
AHCI mode need to
wait ready longer.
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
AHCI Settings
AHCI CD/DVD Boot Time out [35]
SATA Port1 [Not Detected]
SATA Port2 [Not Detected]
SATA Port3 [Not Detected]
SATA Port4 [Not Detected]
SATA Port5 [Not Detected]
SATA Port6 [Not Detected]
AHCI CD/DVD Boot Time Out [35]
Selects the time out value for the booting time of SATA CD/DVD devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
SATA Port1–6 [XXXX]
Displays the status of auto-detection of SATA devices.
v02.61 (C)Copyright 1985-2011, American Megatrends, Inc.
RAMPAGE III BLACK EDITION BIOS Setup Version 0224
Main
Select the type
of devices connected to
the system.
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
SATA Port1
Device :Not Detected
SATA Port1 [Auto]
SMART Monitoring [Enabled]