3 installing el i/o shield and lcd poster, Installing el i/o shield and lcd poster -48 – Asus Rampage II Extreme User Manual

Page 76

2.8.3

Installing EL I/O shield and LCD Poster

2. Orient the motherboard and install

it to the chassis. Make sure that

the motherboard external ports fit

the shield openings.

1. Install the EL I/O shield to the

chassis by snaping it in place

from inside.

3. Locate the EL_CON connector

and connect the shield cable

to the connector in a correct

orientation.

4. Thread the LCD Poster cable

through the back I/O shield

opening until the stopper fits the

opening.

5. Locate and connect the LCD

Poster cable to the LCD_CON

connector.

6. Place the LCD Poster on the

chassis or to wherever you like.

2-48

Chapter 2: Hardware information