Asus Rampage II Extreme - Manual (Page 129)

ROG Rampage II Extreme 3-47
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Now BIOS status : BIOS1
BIOS Boot Selection : Hardware
BIOS Name
BIOS1: Normal
BIOS2: Performance
BIOS Update
BIOS1 to BIOS2
BIOS2 to BIOS1
BIOS Name
BIOS Description Select: [None]
BIOS1 to BIOS2
Only current operating
BIOS can be mirrored.
System will enter
the soft-off state.
After BIOS backup is
finished, system will
auto power-on.
BIOS SETUP UTILITY
Tools
3.8.4 BIOS Flashback
This menu allows you to back up or restore BIOS content from BIOS 1 to BIOS2,
and vice versa.
To perform BIOS Flashback:
1. Highlight [BIOS1 to BIOS2] or [BIOS2 to BIOS1] and press .
If Now BIOS status shows BIOS1 (you are currently using BIOS1), then only
the [BIOS1 to BIOS2] option is available, if BIOS2, then [BIOS2 to BIOS1].
2. The system enters the soft-off state and the onboard BIOS LED will blink to
indicate that the update is proceeding.
3. When the update is complete, the system will restart automatically.
Refer to 2. BIOS flash setting (6-pin BIOS_FLASHBACK) in 2.6 Jumpers for
further information.
BIOS Description Select
Allows you to add description for BIOS1 and BIOS2 to identify the difference.
Configuration options: [None] [BIOS1] [BIOS2]