Creating a raid 10 set (raid 0+1) – Asus Rampage II Extreme User Manual

Page 172

4-40

Chapter 4: Software support

Creating a RAID 10 set (RAID 0+1)

To create a RAID 10 set:
1. From the utility main menu, select 1. Create RAID Volume and press

. The following screen appears.

2. Enter a name for the RAID 10 set and press .
3. When the RAID Level item is highlighted, press the up/down arrow key to

select RAID 10 (RAID 0+1), and then press .

4. When the Stripe Size item is highlighted, press the up/down arrow key to

select the stripe size for the RAID 10 array, and then press . The

available stripe size values range from 4 KB to 64 KB. The default stripe size

is 64 KB.

We recommend a lower stripe size for server systems, and a higher stripe size

for multimedia computer systems used mainly for audio and video editing.

5. Enter the RAID volume capacity that you want and press . The default

value indicates the maximum capacity allowed.

Intel(R) Matrix Storage Manager option ROM v8.0.0.1027 ICH10R wRAID5

[

CREATE VOLUME MENU

]

[

HELP

]

Enter a unique volume name that has no special characters and is

16 characters or less.

[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [Enter]-Select

Name:

RAID Level:

Disks:

Strip Size:

Capacity:

Volume10

RAID10(RAID0+1)
Select Disks
64KB
XXX GB

Create Volume