Asus Rampage II Extreme - Manual (Page 163)

ROG Rampage II Extreme 4-31
Configuration
options
Turbo Mode High
Performance
Mode
Medium Power
Saving Mode
Maximum
Power Saving
Mode
CPU
Frequency
Overclocking
+1% to +30%
N/A Downclocking
-1% to -50%
Downclocking
-1% to -50%
vCore Voltage
Downgrade
N/A N/A Small/Medium/
High
Small/Medium/
High
Chipset
Voltage
Downgrade
N/A N/A On/Off On/Off
Turn Off
hard disks
Never/After 3
mins–After 5
hours
Never/After 3
mins–After 5
hours
Never/After 3
mins–After 5
hours
Never/After 3
mins–After 5
hours
CPU Loadline N/A N/A Light/Medium/
Heavy
Light/Medium/
Heavy
Fan Control N/A N/A Keep Bios
Setting/Slow
Keep Bios
Setting/Quiet
AI Nap
Idle Time
Never/After 3
mins–After 5
hours
Never/After 3
mins–After 5
hours
Never/After 3
mins–After 5
hours
Never/After 3
mins–After 5
hours
Refer to the following table for the configuration options in each mode.
• Fan Control: Adjusts fan speeds to reduce noise and save system power.
•
Quiet: Lowers CPU fan speed and shuts off two chassis fans.
• Slow: Lowers CPU fan and two chassis fan speeds.
• AI Nap Idle Time: Enters AI Nap mode after a certain time during system idle
process.
The TweakIt function is
disabled when 6-Engine
is set to Auto Mode. To
enable TweakIt function,
set 6-Engine to other mode
option. Or, you may click
the TweakIt icon on the
Windows ® notification area
and click Unlock to enable
the TweakIt function.
Ensure that you’ve installed TweakIt driver from the bundled Support DVD.