Asus Rampage II Extreme - Manual (Page 113)

ROG Rampage II Extreme 3-31
3.5.6 LCD Poster and LED Control
LCD Poster Backlight [Turn Off]
LCD Poster Backlight(S5) [Turn Off]
LCD Poster Mode [HWM Information]
HWM Select Mode [All Temperature]
All LED Control [Enabled]
ROG Logo [Enabled]
EL Light [Enabled]
Voltiminder LED [Enabled]
CPU LED Selection [CPU]
NB LED Selection [IOH]
SB LED Selection [ICH]
Turn On/Turn Off LCD
Poster when system
is working
BIOS SETUP UTILITY
Advanced
LCD Poster Backlight [Turn Off]
Allows you to turn on/off the LCD Poster backlight when the system is working.
Configuration options: [Turn On] [Turn Off]
LCD Poster Backlight (S5) [Turn Off]
Allows you to turn on/off the LCD Poster backlight when the system is in soft-off
state. Configuration options: [Turn On] [Turn Off]
LCD Poster Mode [HWM Information]
Allows the LCD Poster to display either hardware information or time.
Configuration options: [Current Time] [HWM Information]
The following item becomes configurable when you set LCD Poster Mode to
[HWM Information].
HWM Select Mode
Allows you to select which hardware information to display on the LCD
Poster. Configuration options: [All Voltage] [All Temperature] [All Fan Speed]
All LED Control [Enabled]
Allows you to enable or disable the onboard LEDs control.
Configuration options: [Enabled] [Disabled]
The following items appear only when you set All LED Control to [Enabled].
ROG Logo [Enabled]
If this item is set to [Enabled], the box labeled as Republic of Gamers on the
heatpipe assembly lights up when the system is on.
Configuration options: [Enabled] [Disabled]