Asus Rampage II Gene - Manual (Page 99)

ROG Rampage II GENE 3-29
CPU LED Selection [CPU]
Allows you to switch the onboard CPU LED display between CPU voltage [CPU],
CPU PLL voltage [CPU PLL] and QPI/DRAM Core voltage [QPI/DRAM Core].
Configuration options: [CPU] [CPU PLL] [QPI/DRAM Core]
NB LED Selection [IOH]
Allows you to switch the onboard northbridge LED display between I/O Hub
voltage [IOH] and IOH PCIE voltage [IOH PCIE].
Configuration options: [IOH] [IOH PCIE]
SB LED Selection [ICH]
Allows you to switch the onboard southbridge LED display between I/O Controller
Hub voltage [ICH] and ICH PCIE voltage [ICH PCIE].
Configuration options: [ICH] [ICH PCIE]
3.5.7 iROG Configuration
iROG Timer Keeper [Last State]
Allows you to set the iROG Time Keeper operation mode.
Configuration options: [Last State] [Disabled] [Enabled]
BIOS SETUP UTILITY
Advanced
iROG Configuration
iROG ID_Number Information
iROG BC_Number: A2
iROG_1 ID_Number: 26
iROG_2 ID_Number: 4
iROG Timer Keeper [Last State]
Current Operation time:
Total Operation time:
iROG Timer Keeper
System will record
using time every 1
minute