Asus P5E-VM HDMI - Manual (Page 89)

ASUS P5E-VM HDMI 4-23
Memory Remap Feature [Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI
memory above the total physical memory. Enable this option only when you
install 4-bit operating system. Configuration options: [Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot
device. Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD]
[PEG/PCI]
Internal Graphics Mode Select [Enabled, MB]
Allows you to decide whether to use the internal graphics device and select
the amount of memory used by the device.
Configuration options: [Disabled] [Enabled, MB] [Enabled, MB]
Set this item to [Disabled] if you intend to install a PCIE x graphics card to the
PCIE x slot.
PEG Port Control [Auto]
Configuration options: [Auto] [Disabled]
PEG Force x1 [Disabled]
This item appears when the PEG Port Control item is set to [Auto].
Configuration options: [Enabled] [Disabled]
The following item appears when the Internal Graphics Mode Select item is
set to [Enabled, MB] or [Enabled, MB].
Video Function Configuration
Video Function Configuration
DVMT Mode Select [DVMT Mode]
DVMT/FIXED Memory [256MB]
BIOS SETUP UTILITY
Advanced
Options
Fixed Mode
DVMT Mode
DVMT Mode Select [DVMT Mode]
Configuration options: [Fixed Mode] [DVMT Mode]
DVMT/FIXED Memory [256MB]
Configuration options: [2MB] [25MB]