Asus L7 - Manual (Page 64)

64
5. BIOS Setup
NOTE: Before attempting to configure a hard disk drive, make sure you have the configuration
information supplied by the manufacturer of the drive. Incorrect settings may cause your system
to not recognize the installed hard disk. To allow the BIOS to detect the drive type automatically,
select [AUTO].
IDE Primary Master
This field is used to configure the IDE Hard Disk installed in the system. To configure a hard disk drive,
move the cursor to highlight the Primary Master field and press the Enter key to enter the sub-menu.
Auto = autotypes
hard-disk drive
installed here.
None = force setting no
IDE device.
CD-ROM = a CD-ROM drive
is installed here.
User = you enter
parameters of hard-disk
drive installed at this
connection. Type: [ Auto ]
Cylinders: [10068]
Heads [ 15]
Sectors: [63]
Maximum Capacity: 4871MB
Multi-Sector Transfers: [16 Sectors]
LBA Mode Control: [Enabled]
32 Bit I/O: [Enabled]
Transfer Mode: [Fast PIO 4]
Ultra DMA Mode: [Mode 2]
Item Specific Help IDE Primary Master [4871MB]
This setting enables
or disables 32 bit IDE
data transfers. Type: [Auto]
Multi-Sector Transfers: [Disabled]
LBA Mode Control: [Disabled]
32 Bit I/O: [ Disabled ]
Transfer Mode: [Fast PIO 4]
Ultra DMA Mode: [Mode 2]
Item Specific Help IDE Primary Slave [CD-ROM]
IDE Primary Slave