Asus P5N32-SLI SE Deluxe User Manual

Page 88

4 - 1 4

C h a p t e r 4 : B I O S s e t u p

PIO Mode [Auto]

Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [Auto]

Selects the DMA mode. Configuration options: [Auto] [SWDMA0]
[SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0]
[UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]

Select Screen
Select Item

Change Option

General Help

F10 Save and Exit
ESC Exit

BIOS SETUP UTILITY

Main

4.3.6

First, Second, Third, and Fourth SATA Device

The BIOS automatically detects the connected Serial ATA devices. There is
a separate sub-menu for each device. Select a device item, then press
to display the SATA device information.

First SATA Device

Device : Not Detected

LBA/Large Mode

[Auto]

Block(Multi-sector Transfer) [Auto]
PIO Mode

[Auto]

DMA Mode

[Auto]

SMART Monitoring

[Auto]

32Bit Data Transfer

[Enabled]

Select the type of
device connected to
the system.

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode
if the device supports this mode, and if the device was not previously
formatted with LBA mode disabled. Configuration options: [Disabled]
[Auto]