Asus P5N32-SLI SE Deluxe - Manual (Page 102)

4 - 2 8 4 - 2 8 4 - 2 8 4 - 2 8 4 - 2 8 C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2005, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
4.4.5 4.4.5 4.4.5 4.4.5 4.4.5 Chipset Chipset Chipset Chipset Chipset
The Chipset menu allows you to change the advanced chipset settings.
Select an item then press to display the sub-menu.
Memory Remap Feature [Disabled]
Primary Graphics Adapter [PCIE1->PCI->PCIE2]
PEG Link Mode [Auto]
NB Hypertransport Frequency [800 MHz]
SB Hypertransport Frequency [800 MHz]
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not
allows remapping of
memory.
Memory Remap Feature [Disabled] Memory Remap Feature [Disabled] Memory Remap Feature [Disabled] Memory Remap Feature [Disabled] Memory Remap Feature [Disabled]
Setting to [Enabled] allows remapping of overlapped PCI memory above the
total physical memory. Configuration options: [Disabled] [Enabled]
Primary Graphics Adapter [PCIE1->PCI->PCIE2] Primary Graphics Adapter [PCIE1->PCI->PCIE2] Primary Graphics Adapter [PCIE1->PCI->PCIE2] Primary Graphics Adapter [PCIE1->PCI->PCIE2] Primary Graphics Adapter [PCIE1->PCI->PCIE2]
Allows selection of the graphics controller to use as primary boot device.
Configuration options: [PCIE2->PCI->PCIE1] [PCIE1->PCI->PCIE2]
PEG Link Mode [Auto] PEG Link Mode [Auto] PEG Link Mode [Auto] PEG Link Mode [Auto] PEG Link Mode [Auto]
Sets the PCI Express graphics link mode. Setting this item to [Auto] allows
the motherboard to automatically adjust the PCI Express graphics link mode
to the correct frequency based on the system configuration. Three
additional settings are available for overclocking the PEG Link Mode.
Configuration options: [Auto] [Disabled] [Normal] [Fast] [Faster]
NB Hypertransport Frequency [800 MHz] NB Hypertransport Frequency [800 MHz] NB Hypertransport Frequency [800 MHz] NB Hypertransport Frequency [800 MHz] NB Hypertransport Frequency [800 MHz]
Sets the Northbridge Hypertransport frequency.
Configuration options: [200 MHz] [400 MHz] [600 MHz] [800 MHz]
[1000 MHz]
SB Hypertransport Frequency [800 MHz] SB Hypertransport Frequency [800 MHz] SB Hypertransport Frequency [800 MHz] SB Hypertransport Frequency [800 MHz] SB Hypertransport Frequency [800 MHz]
Sets the Southbridge Hypertransport frequency.
Configuration options: [200 MHz] [400 MHz] [600 MHz] [800 MHz]
[1000 MHz]