Asus M4A78T-E - Manual (Page 72)

3-14 Chapter 3: BIOS setup
Chapter 3
3.5.8 Memory Configuration
Bank Interleaving [Auto]
Configuration options: [Disabled] [Auto]
Channel Interleaving [XOR of Address bit]
Configuration options: [Disabled] [Address bits 6] [Address bits 12]
[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]
Enable Clock to All DIMMs [Disabled]
Enables unused clocks to DIMMs even if the memory slots are not populated.
Configuration options: [Disabled] [Enabled]
MemClk Tristate C3/ATLVID [Disabled]
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Configuration options: [Disabled] [Enabled]
DCT Unganged Mode [Auto]
Configuration options: [Auto] [Disabled] [Enabled]
Power Down Enable [Disabled]
Enables or disables the DDR power down mode.
Configuration options: [Disabled] [Enabled]
Power Down Mode [Channel]
Allows you to set the DDR power down mode. This item appears only when you enable
the previous item. Configuration options: [Channel] [Chip Select]
Page Smashing [Disabled]
S/W Control of Page Smashing Mechanism.
Configuration options: [Disabled] [IC] [DC] [Both]
Ai Tweaker
Memory Configuration
Bank Interleaving [Auto]
Channel Interleaving [XOR of Address bit]
Enable Clock to All DIMMs [Disabled]
MemClk Tristate C3/ATLVID [Disabled]
Memory Hole Remapping [Enabled]
DCT Unganged Mode [Auto]
Power Down Enable [Disabled]
Page Smashing [Disabled]
Enable Bank Memory
Interleavng.