Chapter 4, Creating a raid 10 configuration – Asus M4A78T-E User Manual
Page 112
4-18
Chapter 4: Software support
Chapter 4
Creating a RAID 10 configuration
To create a RAID 10 set:
1. In the Main Menu, press <2> to enter the “Define LD” function.
2.
Press
3.
Highlight the LD1 item and press
4.
Move to the Assignment item by using the down arrow key and set Y to any four of
the drives.
5.
Press
to save the setting. The utility prompts the following messages:
Press
to key in the desired capacity or press any key to continue.
6.
The utility displays the following screen.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[ Define LD Menu ]
[↑]Up [↓]Down [ESC]Exit [Enter] Select
[ Keys Available ]
LD No RAID Mode Total Drv Capacity(MB) Status
LD 1 RAID 10
4
xxxxxx Functional
LD 2 ----
---- ---- ----
LD 3 ----
---- ---- ----
LD 4 ----
---- ---- ----
LD 5 ----
---- ---- ----
LD 6 ----
---- ---- ----
LD 7 ----
---- ---- ----
LD 8 ----
---- ---- ----
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[↑]Up [↓]Down [ESC]Exit [Space] Change Option [Ctrl-Y]Save
[ Keys Available ]
[ Define LD Menu ]
[ Define LD Menu ]
Channel:ID
Drive Model
Capacity (MB)
Assignment
1:Mas xxxxxxxxx
xxxxxx
Y
2:Mas xxxxxxxxx
xxxxxx
Y
3:Mas xxxxxxxxx
xxxxxx
Y
4:Mas xxxxxxxxx
xxxxxx
Y
LD No RAID Mode Total Drv
LD 1 RAID 10
4
Strip Block: 64 KB
Fast Init: OFF
Gigabyte Boundary: ON
Cache Mode: WriteThru
Press Ctrl-Y to Modify Array Capacity or press any other key
to use maxinum capacity...
Press
to erase MBR or press any key to continue.
Press Ctrl-Y if you are sure to erase MBR! Press any other
key to ignore this option...