Asus M4A78T-E - Manual (Page 111)

ASUS M4A78T-E 4-17
Chapter 4
Creating a RAID 1 configuration
To create a RAID 1 set:
1. In the Main Menu, press <2> to enter the “Define LD” function.
2.
Press , and the following screen appears.
3. Highlight the LD1 item and press to select RAID 1.
4. Move to the Assignment item by using the down arrow key and set Y to any two of the
drives.
5. Press + to save the setting. The utility prompts the following messages:
Press + to key in the desired capacity or press any key to continue. + to key in the desired capacity or press any key to continue. to key in the desired capacity or press any key to continue.
6. The utility displays the following screen.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[ Define LD Menu ]
[↑]Up [↓]Down [ESC]Exit [Enter] Select
[ Keys Available ]
LD No RAID Mode Total Drv Capacity(MB) Status
LD 1 RAID 1 2 xxxxxx Functional
LD 2 ---- ---- ---- ----
LD 3 ---- ---- ---- ----
LD 4 ---- ---- ---- ----
LD 5 ---- ---- ---- ----
LD 6 ---- ---- ---- ----
LD 7 ---- ---- ---- ----
LD 8 ---- ---- ---- ----
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[↑]Up [↓]Down [ESC]Exit [Space] Change Option [Ctrl-Y]Save
[ Keys Available ]
[ Define LD Menu ]
[ Define LD Menu ]
Channel:ID Drive Model Capacity (MB)
Assignment
1:Mas xxxxxxxxx xxxxxx Y
2:Mas xxxxxxxxx xxxxxx Y
3:Mas xxxxxxxxx xxxxxx N
4:Mas xxxxxxxxx xxxxxx N
LD No RAID Mode Total Drv
LD 1 RAID 1 2
Strip Block: 64 KB Fast Init: OFF
Gigabyte Boundary: ON Cache Mode: WriteThru
Press Ctrl-Y to Modify Array Capacity or press any other key
to use maxinum capacity...
Press + to erase MBR or press any key to continue. + to erase MBR or press any key to continue. to erase MBR or press any key to continue.
Press Ctrl-Y if you are sure to erase MBR! Press any other
key to ignore this option...