Asus M4A88TD-V EVO/USB3 - Manual (Page 76)

3-18 Chapter 3: BIOS setup
Chapter 3
3.5.5 CPU/NB Frequency [Auto]
Allows you to select the CPU/NB frequency.
Configuration options: [1400MHz] [1600MHz] [1800MHz] [2000MHz]
3.5.6 HT Link Speed [Auto]
Allows you to select the HyperTransport link speed.
Configuration options: [Auto] [200MHz] [400MHz] [600MHz] [800MHz] [1000MHz] [1200MHz]
[1400MHz] [1600MHz] [1800MHz] [2000MHz]
3.5.7 GPU Booster [Enabled]
[Enabled] Enables auto-optimization of the iGPU frequency.
[Disabled] Set this item to [Disabled] for a fixed iGPU frequency.
Enhanced iGPU SpeedStep [Auto]
This item appears only when you set the GPU Booster item to [Enabled] and allows
you to select an auto-optimization profile for the iGPU frequency.
Configuration options: [Auto] [Turbo] [Extreme] [Manual]
GPU Power Saving Mode [Disabled]
This item appears only when you set the GPU Booster item to [Enabled] and allows
you to enable or disable the GPU Power Saving Mode.
Configuration options: [Enabled] [Disabled]
GPU Engine Clock [700]
This item appears when you set the GPU Booster item to [Disabled] or the Enhanced
iGPU SpeedStep item to [Manual] and allows you to set the GPU Engine Clock. Use allows you to set the GPU Engine Clock. Use
the <+> and <-> keys to adjust the value. You can also key in the desired value using
the numeric keypad. The value ranges from 200 to 2000.
3.5.8 OC Tuner Utility
OC Tuner utility automatically overclocks the frequency and voltage of the CPU and DRAM.
Press �Enter�� to start auto tuning. It takes around five minutes, and the system will reboot for
several times until auto tuning is completed.
E5888_M4A88TD-V EVO-USB3_Content18 18 5/26/10 3:45:38 PM