Asus M4A88TD-V EVO/USB3 - Manual (Page 96)

3-38 Chapter 3: BIOS setup
Chapter 3
Change User Password
Select this item to set or change the user password. The User Password item on top of the
screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a User Password:
1.
Select the Change User Password item and press .
2. On the password box that appears, type a password composed of up to six letters
and/or numbers, then press .
3. Confirm the password when prompted.
The message Password Installed appears after you set your password successfully.
To change the user password, follow the same steps as in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
[Setup] BIOS checks for user password when accessing the Setup utility.
[Always] BIOS checks for user password both when accessing Setup and booting
the system.
E5888_M4A88TD-V EVO-USB3_Content38 38 5/26/10 3:45:51 PM