Asus M4A88TD-V EVO/USB3 - Manual (Page 75)

ASUS M4A88TD-V EVO/USB3 3-17
Chapter 3
DRAM O.C. Profile [DDR3-1600MHz]
This item appears only when you set the CPU OverClocking item to [D.O.C.P.] and allows
you to select a DRAM O.C. profile, which applies different settings to DRAM frequency,
DRAM timing and DRAM voltage. Configuration options: [DDR3-1600MHz] [DDR3-1800MHz]
[DDR3-1866MHz] [DDR3-2000MHz]
Profile Info : xxxxMHz–x-x-x-xx
This item appears only when you set the CPU OverClocking item to [D.O.C.P.] and displays
the current DRAM profile information. The profile information varies according to the DRAM
O.C. Profile you’ve selected.
Overclock Options [Auto]
This item appears only when you set the CPU OverClocking item to [Overclock Profile] and
allows you to select an overclocking profile. Configuration options: [Auto] [Overclock 2%]
[Overclock 5%] [Overclock 8%] [Overclock 10%]
3.5.3 CPU Ratio [Auto]
Allows you to set the ratio between the CPU Core Clock and the FSB Frequency. Use the
<+> and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU
model.
The following two items appear only when you installed a 6-core CPU on this motherboard.
AMD Turbo CORE technology [Enabled]
Enables or disables the AMD Turbo Core technology. Configuration options: [Disabled]
[Enabled]
Turbo CORE Ratio [Auto]
Set the Turbo Core ratio. Use the <+> / <-> keys to adjust the ratio. The valid value ranges
vary depending on your CPU model. Configuration options: [Auto]
3.5.4 DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency. The configuration options vary with the CPU
Bus Frequency item settings.
Selecting a very high DRAM frequency may cause the system to become unstable! If this
happens, revert to the default setting.
E5888_M4A88TD-V EVO-USB3_Content17 17 5/26/10 3:45:38 PM