Asus GigaX1104PS - Manual (Page 15)

14
GigaX1104PS User's Manual
11. Before changing the TCP/IP settings, write down the
existing settings for your computer. You will need this
information later to return to your original settings. In the
Internet Protocol (TCP/IP) Properties dialog box, click
the radio button labeled Use the following IP address:.
Enter a unique IP address in the range from 192.168.1.2 to
192.168.1.254, in the IP address field, and a subnet mask, e.g.
255.255.255.0, in the Subnet mask field.
12. Click button twice to confirm and save your changes,
and then close the Control Panel.
2.2.3 For Windows® 98 & Me PCs
1. In the Windows task bar, click the button, point to
Settings, and then click Control Panel.
2. Double-click the Network icon.
In the Network dialog box, look for an entry started with “TCP/
IP ->” and the name of your network adapter, and then click
button. You may have to scroll down the list to
find this entry. If the list includes such an entry, then the TCP/IP
protocol has already been enabled. Please skip to step 8.
3. If Internet Protocol (TCP/IP) is not displayed as an installed
component, click button.
4. In the Select Network Component Type dialog box, select
Protocol, and then click button.
5. Select Microsoft in the Manufacturers list box, and then click
TCP/IP in the Network Protocols list box and then click
button.
You may be prompted to install files from your Windows 98 or Me
installation CD or other media. Follow the instructions to install the
files.
6. If prompted, click button to restart your computer with
the new settings.