Asus M2N32-SLI Deluxe User Manual

Page 31

3-15

4. Setup the

operation

channel and the

wireless network

security settings. The

operation channel and

security settings must

be identical with the Ad-

hoc nodes you want to

connect. Click

Finish to

apply and return to the

setup utility.

4. To connect an Ad-hoc node, you must manually setup the IP address

of WiFi-AP Solo™. Double-click the wireless icon in the system tray ->

click

Properties -> double-click Internet Protocol (TCP/IP) to open the IP

conﬁguration page.

Make sure that the IP address of the

WiFi-AP Solo™ is within the same

subnet as that of the station (e.g. If the

IP address of the station is 192.168.0.1,

then the IP address of WiFi-AP Solo

™ must be 192.168.0.X, where X = 2 ~

254). When the setup is complete, click

OK.

5. Click the

Status button of the

setup utility to check whether the

connection is established.

Refer to Appendix-A for the available wireless LAN channels in your country

or region.

This manual is related to the following products: