Asus M2N32-SLI Deluxe - Manual (Page 14)

2-2
2.1 Installation
2.1.1 System requirements
Before installing the WiFi-AP Solo™ drivers and utilities, make sure that your
system meets the following requirements.
• ASUS motherboard with WiFi-AP Solo™ onboard solution
• 300MHz or higher
• Minimum 128MB system memory
• Operating system: Windows
® 2000/ XP/ XP-64bit/ Server 2003/
Server 2003 64-bit
• Optical drive for utilities and driver installation
2.1.2 Installing the antenna
The WiFi-AP Solo™ wireless solution comes with an omni-directional and
moveable antenna to maximize the WiFi-AP Solo™ coverage.
To install the antenna:
1. Locate the wireless LAN antenna
port on the motherboard rear
panel.
2. Connect the antenna twist-
on connector (female) to the
wireless LAN antenna port
(male).
3. Place the antenna at an elevated location to enhance your wireless LAN
coverage.
Do not place the antenna under your table or in a closed compartment.