Asus M2N32-SLI Deluxe - Manual (Page 21)

3-5
3.2.2 Setting up Soft AP using setup utility
The setup utility contains six buttons - Status, Config, Survey, Statistics,
Advanced and ICS in the left column. The Survey button is greyed out in soft
AP mode and the ICS button is greyed out in station mode.
1. Open the setup utility and click
Config button. Click the AP/
Station Mode switch button - To
Access Point Mode. The WiFi-
AP Solo™ is switched to soft AP
mode in several seconds.
2. Click ICS button to configure your
Internet connection which you
wish to share. Select the correct
connection and click Apply
button.
3. Click Config button and enter
the Network Monitor tab.
Click Setup button to enter the
Wireless Network Properties
page of the soft AP.