Asus M2N32-SLI Deluxe - Manual (Page 25)

3-9
3.3.2 Setting up Infrastructure using setup utility
You can setup the wireless card connection (Infrastructure) with a wireless AP
and save the settings to a profile.
1. Open the setup utility. Click
Survey button to search for
available wireless networks.
Double-click the AP you want to
join.
2. Configure the
security settings (if
have) in the Wireless
Network Properties
page. Select the key
type, key length and
input the keys. Click
Finish to apply the
settings and return to
the setup utility.
Ask your network administrator for the wireless AP settings. The WiFi-AP
Solo™ settings must be identical with the wireless AP it connects.
3. Setting up the TCP/IP for your
computer. If the DHCP server
function is enabled on the AP,
you can automatically get the IP
address, subnet mask, gateway
and DNS server from the AP by
selecting Obtain an IP address
automatically and Obtain DNS
server address automatically.
If DHCP server is disabled or not
supported on the AP, you must
manually input these parameters.