Asus M2N32-SLI Deluxe - Manual (Page 27)

3-11
1. Open the WiFi-AP Solo™ setup wizard
by right-clicking the system tray icon and
selecting WiFi-AP Solo Wizard.
3.4 Setting up a wireless card (Ad-hoc)
If there is no wireless access point in your environment, you can switch your
WiFi-AP Solo™ to the Ad-hoc mode to connect and communicate with other
wireless-enabled computers. Refer to section 1.4.3 for network topology.
3.4.1 Setting up Ad-hoc with setup wizard
2. Select Station and click Next.
3. Select Ad-hoc and click Next. If
there is no Ad-hoc node in your
environment, you are directed to
Wireless Network Properties
page to create an Ad-hoc profile
so that you can be detected and
connected by other wireless
stations.
4. Setup the operation
channel and the
wireless network
security settings.
The operation channel
and security settings
must be identical
between two Ad-hoc
nodes. Click Finish to
apply and return to the
wizard.