Asus M2N32-SLI Deluxe - Manual (Page 30)

3-14
1. Open the setup utility and click
the Survey button to search for
available Ad-hoc nodes. Double-
click the Ad-hoc node you wish
to connect.
5. Click the Status button of the
setup utility to check whether the
connection is established.
4. To connect WiFi-AP Solo™ from
another wireless station, make sure
that the IP address of the station is
within the same subnet as that of
the WiFi-AP Solo™ (e.g. If the IP
address of the WiFi-AP Solo™ is
192.168.0.1, then the IP address
of the station must be 192.168.0.X,
where X = 2 ~ 254). When the setup
is complete, click OK.
Connecting WiFi-AP Solo™ to an existing Ad-hoc node