Asus SL6000 - Manual (Page 70)

ASUS VPN ADSL Router 69
Chapter 9
Chapter 9
9.4.3 Modify Outbound ACL Rules
To modify an outbound ACL rule, follow the instructions below:
1. Log into Configuration Manager as admin, click the Firewall menu,
and then click Outbound ACL submenu.
2. Select the rule number from the “ID” drop-down list or click on the
icon of the rule to be modified in the outbound ACL table.
3. Make desired changes to any or all of the following fields: action, source/
destination IP, source/destination port, protocol, port mapping, log, and
VPN. Please see Table 9.1 for explanation of these fields.
4. Click on the [Modify] button to modify this ACL rule. The new set-
tings for this ACL rule will then be displayed in the outbound access
control list table at the lower half of the Outbound ACL Configuration
page.
9.4.4 Delete Outbound ACL Rules
To delete an outbound ACL rule, follow the instructions below:
1. Log into Configuration Manager as admin, click the Firewall menu,
and then click Outbound ACL submenu.
2. Select the rule number from the “ID” drop-down list or click on the
icon of the rule to be deleted in the outbound ACL table.
3. Click on the [Delete] button to delete this ACL rule. Note that the ACL
rule deleted will be removed from the ACL rule table located at the
lower half of the same configuration page.
9.4.5 Display Outbound ACL Rules
To see existing outbound ACL rules, follow the instructions below:
1. Log into Configuration Manager as admin, click the Firewall menu,
and then click Outbound ACL submenu.
2. The outbound ACL rule table located at the lower half of the Outbound
ACL Configuration page shows all the configured outbound ACL rules.