Chapter 9, Protocol, Nat type – Asus SL6000 User Manual

Page 68: Time range, Application filters

ASUS VPN ADSL Router

Chapter 9

Protocol

You may select proper protocols here, including “All”, “TCP”, “UDP”, “ICMP”,
“AH” and “ESP”.

NAT Type

None

Select this to not use NAT.

NAT Pool

Select this to use the associated IP addresses in the NAT Pool (see section
9.9.2.

IP Address

Select this option to specify the IP address of the computer that you want the
incoming traffic to be directed.

Interface

Select the external interface as the NAT IP address.

Time Range

Only “Always” available for the time being.

Application Filters

FTP: Only “None” available for the time being.
HTTP: Only “None” available for the time being.
RPC: Only “None” available for the time being.
SMTP: Only “None” available for the time being.

Log

Select “Enable” radio button to enable logging for this ACL rule; otherwise,
select “Disable”.

VPN

This option allows you to select the check box if this policy corresponds to
VPN policy.

This manual is related to the following products:

SL6300