Asus SL6000 - Manual (Page 125)

124 ASUS VPN ADSL Router
Appendix
Appendix
5. This time the router will show below message to indicate the system is
going to be reset to default.
* After the router reboots, don’t push the RE-
SET button this time when you see “Load-
ing CPU 0 ...”.
* If you see “Loading CPU 1 ...”, it would be
too too late to press the RESET button a sec-
ond time.
4. Press the RESET button on the back of the SL6000/SL6300 a second
time.
* When you see Loading CPU 0 ... while the
dots are increasing (about 5 sec after push-
ing the RESET button.)
6. This process is complete and the SL6000/SL6300 will recover its fac-
tory default settings after a few minutes.