Asus M4N82 Deluxe - Manual (Page 86)

3-26 Chapter 3: BIOS setup
Chapter 3
Restore on AC Power Loss [Power Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By PCI/PCIE Device [Disabled]
[Disabled] Disallows the PCI/PCIE/onboard LAN devices to generate a wake even.
[Enabled] Allows you to turn on the system through a PCI/PCIE/onboard LAN device.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Power on by External modems [Disabled]
[Disabled] The computer could not be powered up when the external modem receives
a call while the computer is in Soft-off mode.
[Enabled] The computer could be powered up when the external modem receives a
call while the computer is in Soft-off mode.
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the first try. Turning an external modem
off and then back on while the computer is off causes an initialization string that turns the
system power on.
Power On By PS/2 Keyboard [Disabled]
[Disabled] Disables the Power On by a PS/2 keyboard.
[Space Bar] Allows you to turn on the system by pressing the Space Bar key on the
PS/2 keyboard. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead.
[Power Key] Allows you to turn on the system by pressing the Power key on the PS/2
keyboard. This feature requires an ATX power supply that provides at least
1A on the +5VSB lead.
[Ctrl-Esc] Allows you to turn on the system by pressing the Ctrl key and Esc key
of the PS/2 keyboard. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Power On By PS/2 Mouse [Disabled]
[Disabled] Disables the power on by PS/2 mouse function.
[Enabled] Enables the power on by PS/2 mouse function. This feature requires an
ATX power supply that provides at least 1A on the +5VSB lead.
3.7.4 APM Configuration
APM Configuration
Restore on AC Power Loss [Power Off]
Power On By PCI/PCIE Device [Disabled]
Power on by External modems [Disabled] [Disabled]
Power On By PS/2 Keyboard [Disabled] PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
Power On By RTC Alarm [Disabled]
BIOS SETUP UTILITY
Power
Power On
Power Off
Last State
Options