Asus M4N82 Deluxe - Manual (Page 76)

3-16 Chapter 3: BIOS setup
Chapter 3
DQS Timing Configuration
This item appears only when you set the AI Overclocking item to [Manual] and allows you to
change the advanced DQS settings.
DQS Timing User Controls [Auto]
Allows adjustments of the advanced DQS parameters.
Configuration options: [Auto] [DCT 0] [DCT 1] [Both]
The following sub-items appear only when you set the DQS Timing User Controls item to
[DCT 0], [DCT 1] or [Both].
CKE Setup Time [Auto]
Allows selection of the default setup time for the CKE pins versus MEMCLK.
Configuration options: [Auto] [1/2 CLK] [1 CLK]
CKE Fine Delay [00]
Appears only when you set the CKE Setup Time item to [1/2 CLK] or [1 CLK]. Allows you to set
how long the CKE pins are delayed from the default setup time. Type the desired values using
the numeric keypad and press the key. You can also use the <+> and <-> keys to adjust
the value. The value ranges from 0 to 31.
CS/ODT Setup Time [Auto]
Allows selection of the default setup time for the CS/ODT pins versus MEMCLK.
Configuration options: [Auto] [1/2 CLK] [1 CLK]
CS/ODT Fine Delay [00]
Appears only when you set the CS/ODT Setup Time item to [1/2 CLK] or [1 CLK]. Allows you to
set how long the CS/ODT pins are delayed from the default setup time. Type the desired values
using the numeric keypad and press the key. You can also use the <+> and <-> keys to
adjust the value. The value ranges from 0 to 31.
Addr/Cmd Setup Time [Auto]
Allows selection of the default setup time for the Addr/Cmd pins versus MEMCLK.
Configuration options: [Auto] [1/2 CLK] [1 CLK]
Addr/Cmd Fine Delay [00]
Appears only when you set the CKE Setup Time item to [1/2 CLK] or [1 CLK]. Allows you to set
how long the Addr/Cmd pins are delayed from the default setup time. Type the desired values
using the numeric keypad and press the key. You can also use the <+> and <-> keys to
adjust the value. The value ranges from 0 to 31.
The following six (6) items are adjusted by typing the desired values using the numeric
keypad and press the key. You can also use the <+> and <-> keys to adjust the
value. To restore the default setting, type [auto] using the keyboard and press the
key.
DQS Timing Configuration
DQS Timing User Controls [Auto]
BIOS SETUP UTILITY
Ai Tweaker
Manual allows user to
tweak DQS values