Asus M4N82 Deluxe - Manual (Page 87)

ASUS M4N82 Deluxe 3-27
Chapter 3
3.7.5 Hardware Monitor
CPU/MB Temperature [xxx�C/xxx�F] [xxx�C/xxx�F]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select Ignored if you do not wish to display the detected temperatures.
CPU Fan /Chassis Fan 1 and 2 Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU and chassis fan
speed in rotations per minute (RPM). If the fan is not connected to the motherboard, the field
shows N/A. Select Ignored if you do not wish to display the detected speed.
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignored if you do not want to detect this item.
CPU Q-Fan Function [Disabled]
[Disabled] Disables the CPU Q-Fan control feature. Q-Fan control feature..
[Enabled] Enables the CPU Q-Fan control feature. Q-Fan control feature..
The following two items appear only when you set CPU Q-Fan Function to [Enabled].
Select Fan Type: [PWR Fan]
[PWR Fan] Sets to [PWR Fan] when using a 4-pin CPU fan.
[DC Fan] Sets to [DC Fan] when using a 3-pin CPU fan. Sets to [DC Fan] when using a 3-pin CPU fan..
Hardware Monitor
CPU Temperature [42ºC/107.5ºF]
MB Temperature [33ºC/91ºF]
CPU Fan Speed [4856RPM]
Chassis Fan 1 Speed [N/A]
Chassis Fan 2 Speed [N/A]
VCORE Voltage [ 1.234V]
3.3V Voltage [ 3.320V]
5V Voltage [ 5.026V]
12V Voltage [11.787V]
CPU Q-Fan Function [Disabled]
Chassis Q-Fan Function [Disabled]
BIOS SETUP UTILITY
Power
CPU Temperature
Power On By RTC Alarm [Disabled]
[Disabled] Disables RTC to generate a wake event.
[Enabled] When set to [Enabled], the items RTC Alarm Date/ RTC Alarm Time will
become user-configurable with set values.