beautypg.com

2 dram frequency control [auto, 3 ht link speed [auto, Dram frequency control -13 – Asus M4N82 Deluxe User Manual

Page 73: Ht link speed -13, Chapter 3, Dram frequency [667mhz, Cpu/nb frequency [auto

background image

ASUS M4N82 Deluxe

3-13

Chapter 3

Enable Bank Memory

Interleaving

Memory Configuration

Bank Interleaving

[Auto]

Channel Interleaving

[Auto]

MemClk Tristate C3/ATLVID

[Disabled]

Memory Hole Remapping

[Enabled]

DCT Unganged Mode

[Auto]

Power Down Enable

[Disabled]

BIOS SETUP UTILITY

Ai Tweaker

3.5.2

DRAM Frequency Control [Auto]

Allows you to select the DRAM frequency control method.

Configuration options: [Auto] [Manual]

DRAM Frequency [667MHz]

This item appears only when you set the Dram Frequency Control item to [Manual] and

allows you to manually set the DRAM frequency.

Configuration options: [667MHz] [800MHz] [1066MHz]

CPU/NB Frequency [Auto]

This item appears only when you set the AI Overclocking item to [Manual] and allows

selection of the CPU frequency.

Configuration options: [Auto] [800MHz] [1000MHz] [1200MHz] [1400MHz] [1600MHz]

[1800MHz]

3.5.3

HT Link Speed [Auto]

Allows you to set the CPU-Chipset HyperTransport link speed.

Configuration options: [Auto] [200 MHz] [400 MHz] [600 MHz] [800 MHz] [1 GHz] [1.2 GHz]

[1.4 GHz] [1.6 GHz] [1.8 GHz]

Memory Configuration

This item appears only when you set the AI Overclocking item to [Manual] and allows you to

change the advanced memory settings.

Bank Interleaving [Auto]

Allows you to enable or disable the bank memory interleaving.

Configuration options: [Disabled] [Auto]
Channel Interleaving [Auto]

Allows you to set the channel interleaving mode.

Configuration options: [Disabled] [Address bits 6] [Address bits 12]

[XOR of Address bits [20:16, 6] [XOR of Address bits [20:16, 9]] [Auto]
MemClk Tristate C3/ATLVID [Disabled]

Allows you to enable or disable MemClk Tri-Stating during C3 and Alt VID.

Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]

Allows you to enable or disable memory remapping around memory hole.

Configuration options: [Disabled] [Enabled]