Asus M4N82 Deluxe - Manual (Page 77)

ASUS M4N82 Deluxe 3-17
Chapter 3
3.5.4 CPU Voltage [Auto]
Allows you to set the CPU voltage.
• Refer to the CPU documentation before setting the CPU Vcore voltage. Setting a high
CPU voltage may damage the CPU permanently, and setting a low CPU voltage may
make the system unstable.
• The value [1.90V] of the CPU Voltage item is supported only if the OV_CPU jumper is
enabled. Otherwise the maximum voltage supported is [1.70V].
See 2. CPU overvoltage setting on page 2-23 for details.
3.5.5 CPU/NB Voltage [Auto]
Allows you to set the voltage between the CPU and Northbridge.
The following four (4) items appear only when you set the Ai Overclocking item to
[Manual].
CPU VDDA Voltage [Auto]
Allows you to set the CPU VDDA voltage. The values range from 2.50V to 2.80V with a 0.10V
interval.
DRAM Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.80V to 2.50V with a 0.02V
interval.
HT Voltage [Auto]
Allows you to set the HyperTransport voltage. The values range from 1.20V to 1.50V with a
0.02V interval.
NB Voltage [Auto]
Allows you to set the NorthBridge voltage. The values range from 1.10V to 1.40V with a
0.02V interval.
nForce200 Voltage [Auto]
Allows you to set the nForce200 chip voltage. The values range from 1.20V to 1.50V with a
0.02V interval.
3.5.6 CPU/LDT Spread Spectrum [Disabled]
Set to [Disabled] to enhance CPU/LDT overclocking ability or [Enabled] for EMI control.
Configuration options: [Disabled] [Enabled]
3.5.7 PCIE Spread Spectrum [Disabled]
Configuration options: [Disabled] [Linear Down]
3.5.8 SATA Spread Spectrum [Disabled]
Configuration options: [Disabled] [Linear Down]