Asus M4N82 Deluxe - Manual (Page 81)

ASUS M4N82 Deluxe 3-21
Chapter 3
ECC Configuration
ECC Mode [Disabled]
Disables or sets the DRAM ECC mode that allows the hardware to report and correct
memory errors.
[Disabled] Disables the DRAM ECC mode.
[Basic]
Set to [Basic] to adjust ECC mode automatically.
[Good] Set to [Good] to adjust ECC mode automatically.
[Super] Set to [Super] to adjust the DRAM BG Scrub sub-item manually.
[Max] Set to [Max] to adjust ECC mode automatically.
[User] Set to [User] to adjust all the subitems manually.
SouthBridge Configuration
Set the level of ECC
protection. Note: The
‘Super’ ECC mode
dynamically sets the
DRAM scrub rate so
all of memory is
scrubbed in 8 hours.
ECC Configuration
ECC Mode [Disabled]
DRAM ECC Enable [Disabled]
DRAM SCRUB REDIRECT [Disabled]
4-Bit ECC Mode [Disabled]
DRAM BG Scrub [Disabled]
Data Cache BG Scrub [Disabled]
L2 Cache BG Scrub [Disabled]
L3 Cache BG Scrub [Disabled]
BIOS SETUP UTILITY
Advanced
Advanced Chipset Settings
Hybrid SLI support [Disabled]
Hybrid SLI Frame buffer size [Disabled]
Primary Graphics Adapter [PCIE VGA Card Firs]
SouthBridge ACPI HPET TABLE [Enabled]
BIOS SETUP UTILITY
Advanced
1 Memory have to
over 2G size
2 At least 256 MB of
frame buffer size
3 External VGA
must support this
feature
Hybrid SLI support [Disabled]
Allows you to enable or disable the NVIDIA Hybrid SLI technology.
Configuration options: [Disabled] [Auto]
Hybrid SLI Frame buffer size [256MB]
This item becomes user-configurable when you set the Hybrid SLI support item to [Enabled]
and allows you to set the frame buffer size for the onboard GPU.
Configuration options: [256MB] [512MB] [Disabled]
Primary Graphics Adapter [PCIE VGA Card First]
Allows you to select which graphics controller to use as the primary boot device.
Configuration options: [PCI VGA Card First] [PCIE VGA Card First]
SouthBridge ACPI HPET TABLE [Enabled]
Configuration options: [Disabled] [Enabled]