Asus P5W - Manual (Page 63)

ASUS P5W 2-
9. USB connector (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable
to these connectors, then install the module to a slot opening at the back
of the system chassis. These USB connectors comply with the USB 2.0
specification that supports up to 480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
P5W
®
P5W USB 2.0 connectors
USB56
USB+5V USB_P6- USB_P6+ GND NC
USB+5V USB_P5- USB_P5+
GND
1
USB78
USB+5V USB_P8- USB_P8+ GND NC
USB+5V USB_P7- USB_P7+
GND
1
10. IEEE 1394a port connector (10-1 pin IE1394_1 [Red])
This connector is for an additional IEEE 1394a port. Connect the IEEE 1394a
module cable (red) to this connector, then install the module to a slot opening
at the back of the system chassis.
Never connect a USB port module cable to the IEEE 1394 connector. Doing so
will damage the motherboard!
P5W
®
P5W IEEE 1394a connector
IE1394_1
1
GND +12V TPB1- GND TP
A1-
+12V TPB1+ GND TP
A1+
Only USB34 on the rear panel can support S5 wake-up by keyboard/mouse
function.