Asus p5w 5 – Asus P5W User Manual
Page 187
ASUS P5W
5-
7. Key in the RAID volume capacity that you want then press
the Capacity item is highlighted. The default value indicates the maximum
allowed capacity.
8. Press
message appears.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
9. Press
go back to the Create Volume menu.
10. The main menu appears as follows after you have created the RAID 10 set.
The HDD connected to the EZ_RAID connector is identified as “External
Disk.”
Intel(R) Matrix Storage Manager Option ROM v5.1.2.1002 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
[
DISK/VOLUME INFORMATION
]
RAID Volumes:
ID Name
Level
Strip Size
Status
Bootable
0
Volume0
RAID10(RAID0+1) XXKB
XXX.XX GB
Normal
Yes
Physical Disks:
Port Drive Model
Serial #
Size
Type/Status(Vol ID)
0
XXXXXXXXXXX
XXXXXXXX
XX.XXGB
Member Disk (0)
1
External Disk 0
XXXXXXXX
XX.XXGB
Member Disk (0)
2
XXXXXXXXXXX
XXXXXXXX
XX.XXGB
Member Disk (0)
3
XXXXXXXXXXX
XXXXXXXX
XX.XXGB
Member Disk (0)
[↑↓]-Select
[ESC]-Exit [ENTER]-Select Menu
[
MAIN MENU
]
When you create a RAID 10 set through a cross configuration, you cannot use
the EZ-Backup Manager utility to view the status of hard disks installed on the
EZ_RAID1 and EZ_RAID2 connectors. Intel
®
Matrix Storage cannot read the
hard disk drive information on the ASUS EZ-Backup connectors.