Asus P5N73-CM - Manual (Page 58)

2-18 Chapter 2: BIOS setup
Parallel.Port.Mode.[ECP]
Allows you to select the Parallel Port mode. Configuration options: [SPP] [EPP] [ECP]
[ECP+EPP] [Normal]
The “ECP Mode Use DMA” item becomes user-configurable when the Parallel.Port.Mode
item is set to [ECP] or [ECP+EPP]
The “EPP Mode Select” item becomes user-configurable when the Parallel.Port.Mode item
is set to [EPP] or [ECP+EPP]
EPP.Mode.Select.[EPP1.7]
Allows you to select EPP mode. Configuration options: [EPP1.9] [EPP1.7]
ECP.Mode.Use.DMA.[3]
Allows you to select ECP mode use DMA. Configuration options: [1] [3]
2.4.7 USB Configuration
The items in this menu allows you to change the USB-related features. Select an item then
press to display the configuration options.
USB.Controller.[Enabled]
Allows you to enable or disable the USB controller. Configuration options: [Disabled]
[Enabled]
USB.2.0.Controller.[Enabled]
Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Disabled] [Enabled]
USB.Legacy.Support.[Enabled]
Allows you to enable or disable support for USB devices on legacy operating systems (OS).
Configuration options: [Disabled] [Enabled]
2.5. Power.menu
The Power menu items allow you to change the settings for the Advanced Configuration and
Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then
press to display the configuration options.
Select Menu
Item Specific Help
Select the ACPI state
used for System
Suspend.
Phoenix-Award BIOS CMOS Setup Utility
Main Advanced Power Boot Tools Exit
ACPI Suspend Type [ S1&S3 ]
ACPI APIC support Enabled
APM Configuration
HardWare Monitor