Asus P5N73-CM - Manual (Page 56)

2-16 Chapter 2: BIOS setup
Limit.CPUID.MaxVal.[Disabled]
Enables or disables the Limit CPUID MaxVal technology. .
Configuration options: [Disabled] [Enabled]
Enhanced.C1.(C1E).[Disabled]
Enables or disables the Enhanced C1 (C1E) technology. The process lowers the core to bus
ratio and VID when physical process enters an enhance C1 state.
Configuration options: [Enable] [Disabled]
Execute.Disable.Bit.[Enabled]
Enables or disables the processor’s XD bit feature.
Configuration options: [Enabled] [Disabled]
Virtualization.Technology.[Enabled]
Enables or disables the Virtualization technology. When enabled, a VMM can utilize the
additional hardware capabilities provided by Vanderpool Technology.
Configuration options: [Enable] [Disabled]
CPU.Multiplier.[7.0]
Allows you to set the CPU multiplier. Configuration options: [6.0] [7.0]
Enhanced.Intel.SpeedStep(tm).Tech.[Enabled]
Enables or disables the Enhanced Intel SpeedStep technology to adjust CPU speed
according to CPU workload. Configuration options: [Disabled] [Enabled]
2.4.4. Chipset
Spread.Spectrum.Control
CPU/SATA/PCIE Spread Spectrum [Disabled]
Allows you to enable or disabled CPU/SATA/PCIE spread spectrum.Configuration
options: [Disabled] [Enabled]
Frame.Buffer.Size.[128M]
Allows you to set the frame buffer size. Configuration options: [16M] [32M] [64M] [128M]
[256M]
Primary.Display.Adapter.[PCI-E]
Allows you to select the graphics controller to use as the primary boot device. Conffiguration
options: [PCI] [Onboard] [PCI-E]
2.4.5. PCIPnP
Plug.&.Play.O/S.[No]
When set to [No], the BIOS configures all the devices in the system. When set to [Yes] and if
you install a Plug and Play operating system, the operating system configures the Plug and
Play devices not required for boot.
Configuration options: [No] [Yes]