Asus P5N73-CM - Manual (Page 55)

ASUS P5N73-CM 2-15
tCL (CAS Latency) [Auto]
Allows you to set tCL (CAS Latency). Configuration options: [Auto] [1] [2] [3] [4] [5] [6].
tRCD [Auto]
Allows you to set RAS to CAS delay for a RD/WR command to the same bank.
Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7]
tRP [Auto]
Allows you to set the row precharge time Precharge-to-Active or Auto-Refresh of the
same bank. Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7]
tRAS [Auto]
Allows you set the minimum RAS active time. Configuration options: [Auto] [1] [2] [3] [4]
[5] [6] [7]...[31]
Command Per Clock (CMD) [Auto]
Allows you to command timing setting (per clock unit). Configuration options: [Auto] [1
clock] [2 clock]
**Advanced Memory Settings**
tRRD [Auto]
Allows you to set tRRD. Configuration options: [Auto] [1] [2] [3] [4] [5] [6]...[15].
tRC [Auto]
Allows you set the RAS to RAS or auto refresh time of the same bank. Configuration
options: [Auto] [1] [2] [3] [4] [5] [6] [7]...[31]
tWR [Auto]
Allows you set the tWR. Configuration options: [Auto] [1] [2] [3] [4] [5] [6]
tWTR [Auto]
Allows you set the tWTR. Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7]...[15]
tREF [Auto]
Allows you set the tREF. Configuration options: [Auto] [1] [2]
1.8VDual.Over.Voltage.Control.[Default]
Allows you to adjust +1.8V dual over voltage. Configuration options: [+6.25mV] [+12.50V]
[+18.75V] [+25.00V]...[+393.75V]
VCORE.Over.Voltage.Control.[Auto]
Allows you to set the VCORE over voltage. Configuration options: [Auto] [+50mv] [+100mv]
[+150mv]
NB.Over.Voltage.Control.[Disabled]
Allows you to set the NB over voltage. Configuration options: [Disabled] [+50mv] [+100mv]
[+150mv]
2.4.2. AI.NET.2
Post.check.LAN.cable.[Disabled]
Enables or disables checking of the post LAN cable.
Configuration options: [Disabled] [Enabled]
2.4.3 CPU Configuration
CPU.Internal.Thermal.Control.[Auto]
Enables or disables the CPU internal thermal control. .
Configuration options: [Auto] [Disabled]