Asus P5N73-CM - Manual (Page 27)

ASUS P5N73-CM 1-17
1.7.3. Installing.a.DIMM
Unplug the power supply before adding or removing DIMMs or other system components.
Failure to do so can cause severe damage to both the motherboard and the components.
To install a DIMM:
1.
Press the retaining
clips outward to
unlock a DDR2 DIMM
socket.
2. Align a DIMM on the
socket such that the
notch on the DIMM
matches the break on
the socket.
A DDR2 DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a
DIMM into a socket to avoid damaging the DIMM.
3. Firmly insert the DIMM into the socket
until the retaining clips snap back in place
and the DIMM is properly seated.
1.7.4. Removing.a.DIMM
To remove a DIMM:
1.
Simultaneously press the retaining clips
outward to unlock the DIMM.
2. Remove the DIMM from the socket.
Support the DIMM lightly with your
fingers when pressing the retaining
clips. The DIMM might get damaged
when it flips out with extra force.
Unlocked.retaining.clip
1
DDR2.DIMM.notch
2
1
3
Locked.Retaining.Clip
DDR2.DIMM.notch
1
2