Asus P5N73-CM - Manual (Page 53)

ASUS P5N73-CM 2-13
Access.Mode.[Auto]
Sets the sector addressing mode. Configuration options: [Large] [Auto]
Before attempting to configure a hard disk drive, ensure that you have the correct
configuration information supplied by the drive manufacturer. Incorrect settings may cause
the system to fail to recognize the installed hard disk.
Capacity
Displays the auto-detected hard disk capacity. This item is not configurable.
Cylinder
Shows the number of the hard disk cylinders. This item is not configurable.
Head
Shows the number of the hard disk read/write heads. This item is not configurable.
Landing.Zone
Shows the number of landing zone per track. This item is not configurable.
Sector
Shows the number of sectors per track. This item is not configurable.
2.3.6. HDD.SMART.Monitoring.[Disabled]
Allows you to enable or disable the HDD Self-Monitoring Analysis and Reporting Technology
(SMART) feature. Configuration options: [Disabled] [Enabled]
2.3.7. Installed.Memory.[xxx.MB]
Shows the size of installed memory.
2.3.8. Usable.Memory.[XXX.MB]
Shows the size of usable memory.
After entering the IDE hard disk drive information into BIOS, use a disk utility, such as
FDISK, to partition and format new IDE hard disk drives. This is necessary so that you can
write or read data from the hard disk. Ensure to set the partition of the Primary IDE hard
disk drives to active.