Asus MAXIMUS V GENE - Manual (Page 94)

3-14 Chapter 3: BIOS setup
Chapter 3
CPU Current Capability [Auto]
This item provides wider total power range for overclocking. A higher value
brings a wider total power range and extends the overclocking frequency
range simultaneously.
Configuration options: [100%] [110%] [120%] [130%] [140%] [150%]
[OCP Disable]
VRM VRHOT Control [Default]
This item allows you to enable the VRM over temperature protection.
Configuration options: [Default] [Disable]
CPU Power Thermal Control [130]
A higher temperature brings a wider CPU power thermal range and extends
the overclocking tolerance to enlarge the O.C. potential. Use the <+> and <->
keys to adjust the value. The values range from 130 to 151.
DO NOT remove the thermal module. The thermal conditions should be
monitored.
iGPU Load-line Calibration [Auto]
Allows you to set the iGPU Load-line Calibration.
Configuration options: [Auto] [Regular] [High] [Extreme]
iGPU Current Capability [100%]
Allows you to set the iGPU Current Capability.
Configuration options: [100%] [110%] [120%] [130%] [140%]
DO NOT remove the thermal module while changing the DIGI+ VRM related
parrameters . The thermal conditions should be monitored.
DRAM Current Capability [100%]
Setting a higher value brings a wider total power range and extends the
overclocking frequency range simultaneously.
Configuration options: [100%] [110%] [120%] [130%]
DRAM Voltage Frequency [Auto]
This item allows you to adjust the DRAM switching frequency. Assign a fixed
high DRAM frequency to increase O.C range or a lower DRAM frequency for
better system stability. Configuration options: [Auto] [manual]
DRAM Power Phase control [Auto]
[Auto] Allows you to set the default DRAM power phase control settings.
[Optimized] Allows you to set ASUS optimized phase tuning profile.
[Extreme] Allows you to set the Full phase mode.
DRAM Power Thermal Control [110]
A higher temperature brings a wider DRAM power thermal range, and
extends the overclocking tolerance to enlarge the O.C. potential. Use the <+>
and <-> keys to adjust the value. The values range from 110 to 131.