Asus MAXIMUS V GENE - Manual (Page 91)

ROG MAXIMUS V GENE 3-11
Chapter 3
MCH Duty Sense (CHB) [Auto]
Configuration options: [Auto] [1] – [31]
Channel A DIMM Control [Enable Both DIMMS]
Configuration options: [Enable Both DIMMS] [Disable DIMM0] [Disable
DIMM1] [Disable Both DIMMS]
Channel B DIMM Control [Enable Both DIMMS]
Configuration options: [Enable Both DIMMS] [Disable DIMM0] [Disable
DIMM1] [Disable Both DIMMS]
DRAM Read Additional Swizzle [Auto]
Configuration options: [Auto] [Enabled] [Disabled]
DRAM Write Additional Swizzle [Auto]
Configuration options: [Auto] [Enabled] [Disabled]
GPU.DIMM Post
The sub-items in this menu display the status of the installed VGA cards and
memory. The field shows N/A if there’s no device installed on that slot.
CPU Power Management
The sub-items in this menu allow you to set the CPU ratio and features.
CPU Ratio [Auto]
Allows you to manually adjust the maximum non-turbo CPU ratio. Use <+> and
<-> keys to adjust the value. The valid value ranges vary according to your CPU
model.
Enhanced Intel SpeedStep Technology [Enabled]
Allows you to enable or disable the Enhanced Intel ® SpeedStep Technology
(EIST).
[Disabled] Disables this function.
[Enabled] The operating system dynamically adjusts the processor voltage
and core frequency which may result in decreased average
consumption and decreased average heat production.
Turbo Mode [Enabled]
Allows you to enable your core processor’s speed to run faster than the
marked frequency in a specific condition.
Configuration options: [Disabled] [Enabled]
The following items appears only when you set the Turbo Mode to [Enabled].