Asus MAXIMUS V GENE - Manual (Page 108)

3-28 Chapter 3: BIOS setup
Chapter 3
Memory Remap Feature [Enabled]
Allows you to enable remapping the memory above 4GB.
[Enabled]
Enables the function.
[Disabled] Disables this function.
Graphics Configuration [Auto]
Allows you to select a primary display from iGPU, and PCIe graphical devices.
Primary Display [Auto]
Allows you to select which of the iGPU/PCIE Graphics device should be the
Primary Display.
Configuration options: [Auto] [IGPU] [PCIE]
iGPU Memory [64M]
Allows you to select the amount of system memory allocated to DVMT 5.0
used by the iGPU.
Render Standby [Enabled]
Allows you to enable the Intel Graphics Render Standby support to reduce
the iGPU power use when idle.
Configuration options: [Disabled] [Enabled]
iGPU Multi-Monitor [Disabled]
Allows you to enable the iGPU Multi-Monitor. For Lucid Virtu MVP function
supports, set this item to [Enabled] to empower both integrated and discrete
graphics. iGPU shared system memory size is fixed in 64MB.
Configuration options: [Disabled] [Enabled]
NB PCIe Configuration
Allows you to configure the NB PCI Express settings.
PCIEX16_1 Link Speed [Auto]
Allows you to configure the PCIEX16_1 speed.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
PCIEX16_2 Link Speed [Auto]
Allows you to configure PCIEX16_2 speed.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]