Asus RX3042H - Manual (Page 108)

96
System Management RX3042H User's Manual
1. Open the Log configuration page, as shown in Figure 10.6, by
clicking the Management ->Log menu
2. Click Enable Remote Log check box to enable remote logging.
3. Enter the syslog server IP address in the Syslog Server IP
Address field.
4. Click on Apply button to save the settings.
10.6.2 View the System Log
You may open the firewall log page by clicking Firewall/NAT
->Log menu to see any logged. Figure 10.7 shows a sample
log. You may click on the Reload button at the bottom of the
Log configuration page to see the updated log messages. To
clear the log messages, just click on the Clear Log button.
Figure 10.7 Sample Log
10.7 Configuration Management
10.7.1 Restore System Configuration to Factory
Default Settings
At times, you may want to restore system configuration to the
factory default settings to eliminate problems resulted from incorrect
system configuration. Follow the steps below to reset the system
configuration:
1. Open the Factory Default configuration page, as shown in Figure
10.8, by clicking the Management ->Configuration ->Factory
Default menu.