beautypg.com

Asus Maximus III Formula User Manual

Page 108

background image

3-34

Chapter 3: BIOS setup

The Chassis Fan Profile item appears when you enable the Chassis Q-Fan

Function feature.

Chassis Fan Profile [Standard]

This item appears only when you enable the Chassis Q-Fan Control feature and

allows you to set the appropriate performance level of the chassis fan.
[Standard] Sets to [Standard] to make the chassis fan automatically adjust

depending on the chassis temperature.

[Silent] Sets to [Silent] to minimize the fan speed for quiet chassis fan

operation.
[Turbo] Set to [Turbo] to achieve maximum chassis fan speed.

PWRFAN Control [Disabled]

Allows you to select the power fan control mode. When this item is set to

[Duty Mode], you can configure the PWRFan Duty item.

PWRFan Duty [50%]

Allows you to set the fan duty cycle. This item appears when the PWRFan Control

item is set to [Duty Mode].

Configuration options: [4�%] [5�%] [6�%] [7�%] [8�%] [9�%]

OPTFAN1/2/3 Control [Disabled]

Allows you to select the optional fan control mode. When this item is set to

[Duty Mode], you can configure the OPTFan1/2/3 Duty item. If you set this

item to [User Mode], you are allowed to configure the OPTFan1/2/3 Low

Speed Temp and OPTFan1/2/3 Full Speed Temp item.

Configuration options: [Disabled] [Duty Mode] [User Mode]

You need to connect the thermal sensor cables to the OPT_TEMP1/2/3

connectors to enable this function.

OPTFan1/2/3 Duty [50%]

Allows you to set the fan duty cycle. This item appears when the OPTFan1/2

Control item is set to [Duty Mode].

Configuration options: [4�%] [5�%] [6�%] [7�%] [8�%] [9�%]
OPTFan1/2/� Low Speed Temp [25˚C]

Allows you to set the temperature at which the power fan rotates at low speed.

This item appears when the OPTFan1/2 Control item is set to [User Mode].

Configuration options: [25˚C] [3�˚C] [35˚C] [4�˚C]
OPTFan1/2/� Full Speed Temp [6�˚C]

Allows you to set the temperature at which the power fan rotates at full speed.

This item appears when the OPTFan1/2 Control item is set to [User Mode].

Configuration options: [6�˚C] [7�˚C] [8�˚C] [9�˚C]