Asus P2B-D2 - Manual (Page 84)

ASUS P2B-D2 User’s Manual 84
WINDOWS NT 4.0
WINDOWS NT 4.0
C. VGA Driver
10. If a message appears stating the driver is already installed on the system and
asks if you want to use the current or new drivers, be sure to select New.
11. If prompted for the driver diskette a second time, click Continue.
12. When the message "The drivers were successfully installed" is displayed, re-
move the CD, and then click OK.
13. Close the Display Type window.
14. Close the Display Properties window. The System Settings Change window will
appear.
15. Click Yes to restart your computer.
NOTE: If installing Windows NT 4.0 with the ASUS device currently installed in
the system, proceed through the Windows NT installation as normal. When the in-
stallation program prompts the user to choose a display mode, choose Cancel from
the Display Settings window to ignore this step for now. Finish the installation and
when you restart Windows, follow the steps outlined above to install the driver for
your ASUS device.