Appendix – Asus P2B-D2 User Manual
Page 143
ASUS P2B-D2 User’s Manual
143
Appendix
3. To create a new partition on the disk device, press . A screen similar to this
appears:
Select SCSI Device to Partition
HA #0 - Target 0
HA #0 - Target 4
QUANTUM LP105S 910109405
IOMEGA BETA90
Create, Delete,
Adaptec SCSI Disk Setup Program v3.33
Logical Drive Info
64
32
85
512
85
head
sectors/track
cylinders
bytes/sector
megabytes
2AEEFh blocks
Type
Start End Megs
Create a DOS Partition
Start Cylinder:
End Cylinder:
0
84
The Create a DOS Partition window suggests that you create one partition on
the disk device, equal to its entire capacity. If this is what you want to do, skip to
step 5.
4. To change the size of the partition, use the arrow keys to select Start Cylinder
and End Cylinder, and type in the numbers you want. Partitions up to 2 Gigabytes
are supported.
5. When the number of cylinders is what you want, press
mation prompt appears, select Yes and press
To create more partitions on the same disk device, repeat steps 3, 4, and 5. As
you create partitions on the disk, they are added to the window at the upper right
of the screen, as shown here:
Select SCSI Device to Partition
HA #0 - Target 0
HA #0 - Target 4
QUANTUM LP105S 910109405
IOMEGA BETA90
Create, Delete,
Adaptec SCSI Disk Setup Program v3.33
Logical Drive Info
64
32
85
512
85
head
sectors/track
cylinders
bytes/sector
megabytes
2AEEFh blocks
Type
Start End Megs
DOS
0
84
85
6. Press
want to partition a different disk device, select the device from the list and re-
peat the earlier steps.
7. To quit afdisk, press
Appendix
iii. EZ-SCSI Utility