Iii. installation – Asus P2B-D2 User Manual

Page 28

Text mode
Original mode

ASUS P2B-D2 User’s Manual

Connectors

III. INST

ALLA

TION

III. INSTALLATION

6. Universal Serial BUS Connectors 1 & 2 (Two 4-pin USB)

Two USB ports are available for connecting USB devices.

Universal Serial Bus (USB) 2

USB 1

7. LAN Connector (8-pin RJ-45)

This connector can be used to connect the onboard 32-bit 10/100 Mbps Ethernet
LAN Controller (optional) to a host or a hub.

RJ-45 Port

8. Hard Disk Activity LED (2-pin IDELED)

This connector supplies power to the cabinet’s hard disk or IDE activity LED.
Read and write activity by devices connected to the Primary or Secondary IDE
connectors will cause the LED to light up.

TIP: If the case-mounted LED does
not light, try reversing the 2-pin plug.

P2B-D2 IDE Activity LED Lead

HD LED (for Adaptec and IDE)