Asus P2B-D2 - Manual (Page 59)

ASUS P2B-D2 User’s Manual 59
IMPORTANT: If your hard disk was already formatted on an older previous system,
incorrect parameters may be detected. You will need to enter the correct parameters
manually or use low-level format if you do not need the data stored on the hard disk.
If the parameters listed differ from the ones used when the disk was formatted, the
disk will not be readable. If the auto-detected parameters do not match the ones that
should be used for your disk, do not accept them. Press to reject the presented
settings and enter the correct ones manually from the Standard CMOS Setup screen.
Save & Exit Setup
Select this option to save into the CMOS memory all modifications you speci-
fied during the current session. To save the configuration changes, highlight the
“Save & Exit Setup” option on the main screen, type “Y”, and then press .
Exit Without Saving
Select this option to exit the Setup utility without saving the modifications you
specify during the current session. To exit without saving, highlight the “Exit With-
out Saving” option on the main screen and then press .
IV. BIOS SOFTWARE
IV. BIOS
Save & Exit